3500W 12V PURE SINE POWER INVERTER WITH 20A BATTERY CHARGER

Product No.:
I-B-3500/12
Shippingtime:
after order max. 2 Weeks after order max. 2 Weeks (*Info*)
Output and Plug:
230V / 50HZ / European Plug
230V / 50Hz / UK Plug
240V / 50Hz / Australia Plug
120V / 60Hz / USA Plug
694.94 USD


Add to cart
Weight per unit: 11 kg

Pure Sine Wave Power Inverter
3500 Watt / Max 7000W / 12 Volt DC
+ ATS + UPS + 20A IUoU Battery Charger


This Pure Sine Wave Inverter produces from 12 Volt Direct Current Voltage (DC) a Pure Alternating Current Voltage (AC). For that it needs only a 12 Volt Direct Current Voltage (DC) for example from a Battery or Generator.

   Integrated 20A IUoU Battery Charger for Lead-Acid, Gel, AGM and LiFePo4 (BMS) Batteries
Once 230V is applied, the connected battery will be recharged by an built in battery charger. The charging capacity is maximum 20A. If another charger is used in your system there will be no impairment. Both chargers check the condition of the battery and adjust their charging behavior. The IUoU charging process ensures that the charger automatically switches after the main charge phase into the floating status. As a result the self-discharge and premature aging of the accumulator is counteracted and the batteries can be charged permanently.

   Automatic detection of an external voltage source and switching between battery and grid operation
If an external power source is connected, the Automatic Transfer Switch (ATS) turns the input voltage to the ouput socket on the front panel. The connected consumers are then supplied from the external power source. The built-in intelligent IUoU battery charger ensures that at the same time the battery system will be fully loaded and switches afterwards into the floating status. As soon as the external power is not available, the ATS switches back to battery operation. Because of the short switching time of only 10 milliseconds this Pure Sine Wave Inverter is suitable for Uninterruptible Power Supply (UPS).
 

Highlights  Inclusive 

New Condition
Weight: 8,0 kg Net / 11,0 kg Gross
Size: 45cm x 21cm x 15cm

2 times Output Peak Capacity for 2 seconds
Earthed Output Socket
USB port to charge small consumers
High Efficiency (low power losses)
LED Display (Inverter, Fault, etc.)
Input & Output isolated
Short Circuit Protection
Overload Shut Down
Low Voltage Shut Down
Thermal Protection
Polarity Protection
*Newest Soft-Start Technology integrated
*Microcontroller
*Automatic Voltage Regulation (AVR)
*Intelligent Power Management (IPM)
*Intelligent Fan Control (IFC)
Certificates: CE, E-Mark, RoHS, ISO 9001
3 Years Warranty
 

*Explanation at the end of the document 

Suitable Battery Cable Set


Remote Control


Spare Fuses

User Manual (english/german)


 

   
   Do not waste money on dangerous cheap merchandise with wrong performance data !
Our Power Inverters price-performance ratio is one of the best on the market ! These draw out by high stability of voltage, frequency and high efficiency. Via micro controller electronics a constant monitoring of the most important parameters takes place to react on disturbances and irregularities in supply voltage.


This inverter is ideally suited for the operation of Electronic Equipment such as e.g. notebook, laptop, computer, game console, radio, audio equipment, DVD player, lighting, fans, blowers etc. / Kitchen and Household Appliances such as coffee machine, kettle, fridge, freezer, oven, microwave etc. / Tools and Gardening Equipment such as pumps, grinder, power drill, electric soldering iron, saw etc. / Of course, also all other devices with a continuous power up to 3500W.


To determine the right Power Inverter, you have to check your consumers power consumption data. The accurate performance data usually you can find on the type label of your electric consumer or in the user manual. Consider whether you still want to schedule power reserves for possible future devices. Please note also that inductive loads (typically consumer with motors) such as electric motors, refrigerators, air conditioners, compressors, drills, circula saws and pumps need a multiple of the rated output as starting power.
 
Specifications Power Inverter
*optional
3500 Watt (max.7000W) Pure Sine Wave Power Inverter
with IUoU Battery Charger
Model No. I-B-3500/12  
Output Continous Capacity   3500W
Output Peak Capacity   7000W
*Output Voltage *120V / 230V / 240V AC
Output Voltage Stability   +/- 3%
*Output Frequency *50Hz or 60Hz Frequency Stabilized
Output Signal Form Pure Sine Wave
*Output Side Connection   *Europe(Schuko)- / U.K.- / USA- / Australia- / Universal- Socket
Input Rated Voltage 12V DC      
Input Voltage Range    10-16V DC  
Input Side Connection   Terminal for Battery Cable
No Load Current Draw 0,9A  
Efficiency (full load) max. 92%
Total Harmonic Distortion (THD) max. 3%
Protection (Output)
Output Short Circuit Protection  
Output Overload Auto Shut Down
Protection (Input)
Low Voltage Warning   10,5V ± 0,5V DC  
Low Voltage Shut Down 10,0V ± 0,5V DC  
Over Voltage Shut Down    16,0V ± 0,5V DC  
Soft Start
Cooling by Fan 40°C ± 2°C on
Thermal Protection > 60°C
Polarity Protection by Fuse
HI-POT (Isolation Test)
Operation-, Ambient Temperature -15°C up to +50°C
Storage Temperature -30°C up to +70°C
Dimensions (LxWxH) 45cm × 21cm × 15cm
Net Weight 8,0 kg
Certification CE (EMC+LVD), E-Mark, RoHS, SGS (ISO 9001)
Specifications Battery Charger  
*AC Input Voltage *220V-240V ±10% / 100V-120V ±10%
*AC Input Frequency *50Hz / 60Hz
DC Charging Voltage 10,5V - 15V  
DC Charging Current 20A  
Three Stage Charging Bulk / Absorption / Float charge
Battery Type Lead-Acid / Gel / AGM
Automatically Switching Time max. 10ms

*Soft-Start-Technology:
Reduces high starting currents of consumer and protects thereby the inverter and your devices against damages.
 
*Microcontroller:
Controlled protective and warning functions.Recognizes wrong battery input voltage for example 24V instead of 12V and accomplishes an auto shut down if necessary. When using a battery charger the inverter must not be clamped or switched off.
 
*Automatic Voltage Regulation (AVR):
The output voltage is kept always constant by a processor, even if the input voltage of the battery drops.
 
*Intelligent Power Management (IPM):
The IPM steers all important functions so that voltage fluctuations will be reduced and the frequency remains stable. This protects the attached consumers
 
*Intelligent Fan Control (IFC):
The cooling is temperature and load controlled. The fan only activate if the temperature in the equipment inside is too high (temperature controlled) or if larger consumers are attached (load controlled). This has the advantage that the fan only starts when required and therefore energy is saved and noise is avoided. 
Found Cheaper ? Please write us !